Note: This product is intended exclusively for industrial customers who are trained in the use of UVC radiation and can ensure hazard-free use. Do you have further questions concerning this product or the topic UVC?
Warnings
The article is a powerful UVC module which can be used for the disinfection of surfaces. It emits at a wavelength of 275 nm which is not visible to the human eye.
It is imperative to ensure that users wear suitable protective clothing against UV radiation at all times.
All skin and eye contact must be avoided.We recommend the use of the following protective agents:
Safety goggles
Gloves
Face Shield
Protective clothing
that shields UV light from the skinWear protective clothing at all times during use and ensure that no other persons are within reach of the radiation source without taking appropriate safety precautions.
Light can reflect, therefore special precautions have to be taken with reflecting surfaces (e.g. mirrors).
If skin tissue is exposed to the light source, skin irritation comparable to sunburn may occur.
If necessary, treat the affected areas with a suitable cream or consult a physician.
Low wavelength UV light can cause permanent damage to the retina in severe cases.
Make sure to wear protective goggles at all times when using the device.
Highly efficient disinfection module for professional applicationsThe UVC LED module Violet from Light Experts Tech offers professional users a highly efficient solution for disinfection and decontamination.
The LEDs used on the UVC module emit a wavelength of 275 nm and thus enable sterilisation and cleaning of air, liquids and surfaces.
Bacteria, germs and viruses can be reliably killed/inactivated in this way.In addition to 12 powerful Seoul Viosys UVC LEDs, there is also a red, blue and green status LED on the module's circuit board.
The sterilisation module is operated with 450 mA constant current.
An external control unit can be easily connected. The module is therefore aimed at the processing industry, such as lighting manufacturers and companies from the medical technology sector.
The UVC module has a radiated power of 152 mW when operating at a typical current of 450 mA, but can be increased to 192 mW when a maximum current of 600 mA is flowing.
Features of the UVC constant current module
Constant current operation with 450 mA
12 Seoul Viosys UVC LEDs on board
3 status LEDs (red, green, blue)
For professional users
Can be combined with the UVC rod lens
In addition, with the NCSU334A and NCSU334B from the world market leader Nichia, we offer two of the most efficient UVC LEDs in our portfolio.
Note: This product is intended exclusively for industrial customers who are trained in the use of UVC radiation and can ensure hazard-free use. Do you have further questions concerning this product or the topic UVC?
Warnings
The article is a powerful UVC module which can be used for the disinfection of surfaces. It emits at a wavelength of 275 nm which is not visible to the human eye.
It is imperative to ensure that users wear suitable protective clothing against UV radiation at all times.
All skin and eye contact must be avoided.We recommend the use of the following protective agents:
Safety goggles
Gloves
Face Shield
Protective clothing
that shields UV light from the skinWear protective clothing at all times during use and ensure that no other persons are within reach of the radiation source without taking appropriate safety precautions.
Light can reflect, therefore special precautions have to be taken with reflecting surfaces (e.g. mirrors).
If skin tissue is exposed to the light source, skin irritation comparable to sunburn may occur.
If necessary, treat the affected areas with a suitable cream or consult a physician.
Low wavelength UV light can cause permanent damage to the retina in severe cases.
Make sure to wear protective goggles at all times when using the device.
Highly efficient disinfection module for professional applicationsThe UVC LED module Violet from Light Experts Tech offers professional users a highly efficient solution for disinfection and decontamination.
The LEDs used on the UVC module emit a wavelength of 275 nm and thus enable sterilisation and cleaning of air, liquids and surfaces.
Bacteria, germs and viruses can be reliably killed/inactivated in this way.In addition to 12 powerful Seoul Viosys UVC LEDs, there is also a red, blue and green status LED on the module's circuit board.
The sterilisation module is operated with 450 mA constant current.
An external control unit can be easily connected. The module is therefore aimed at the processing industry, such as lighting manufacturers and companies from the medical technology sector.
The UVC module has a radiated power of 152 mW when operating at a typical current of 450 mA, but can be increased to 192 mW when a maximum current of 600 mA is flowing.
Features of the UVC constant current module
Constant current operation with 450 mA
12 Seoul Viosys UVC LEDs on board
3 status LEDs (red, green, blue)
For professional users
Can be combined with the UVC rod lens
In addition, with the NCSU334A and NCSU334B from the world market leader Nichia, we offer two of the most efficient UVC LEDs in our portfolio.
